|
|
| |
 |
| Mini
Ventilation Training Analyzer |
|
 |
|
| |
“Manual
Ventilation Training… Helps the Provider Eliminate
Gastric Insufflation”!
Students being trained in Bag-Valve-Mask ventilation are generally
taught to ventilate until the chest rises. However, studies
have shown that the delivery of incorrect rate and volumes
is common. If the lungs are over-inflated or the delivered
flow rate is too high, the high airway pressure generated will
cause air to enter the stomach. In real life this can only
be seen when the patient’s abdomen distends and/or they
begin to vomit.
The Mini Ventilation Training Analyzer has been developed to
demonstrate the correct ventilation technique when using a
Bag-Valve-Mask resuscitator and the complications of gastric
insufflation associated with incorrect technique.
Base on a normal adult lung capacity, compliance, airway resistance
and lower esophageal sphincter (LES) pressure, the Mini Ventilation
Training Analyzer responds to the student’s squeeze of
the BVM like a real patient. If they squeeze the BVM too quickly
or forcefully, the high pressure they generate (due to high
air flow from the BVM) will cause air to enter the stomach
through the calibrated Lower Esophageal Sphincter.
The Mini Ventilation Training Analyzer is a unique tool that
teaches real life skills while identifying real life problems.
It can also be used for training in the proper use of manually
triggered, gas powered resuscitators.
|
|
|
Small, lightweight and easily portable |
|
Simple to assemble |
|
Calibrated "Lower Esophageal Sphincter"
|
|
Simulated stomach
|
|
Calibrated Test Lung with compliance band and normal airway
restriction
|
|
22/22mm BVM connector
|
|
30 mm "Stomach" connector |
|
Unique lung connector |
|
Instructions for use printed on the top label
|
 |
Part
Number and Product Description |
 |
|
|
| |
01TA1000
|
Mini Ventilation Training Analyzer in Moulded
Plastic Carrying Case |
| |
01TA1200 |
Mini Ventilation Training Analyzer complete Training
Kit in Moulded Plastic Carrying Case c/w SMART BAG® Controlled
Manual Ventilation Bag-Valve-Mask Resuscitator and Easy
Grip® Bag-Valve-Mask Resuscitator in Separate Carrying
Case |
|
| |
|
| Bio-Barrier® CPR
Manikin Training Faceshield |
|
 |
|
| |
Disinfecting
CPR manikins between students is common practice, however,
the exhaled air remaining in the manikin’s lungs from
previous student still constitutes a potential health risk.
The Bio-Barrier® CPR Manikin Training Faceshield provides over 99% bacterial
and viral filtration efficiency with minimal resistance to the passage of air.
By reducing the risk of contamination from the exhaled breath remaining in the
manikin, you remove the need for simulated breathing or wiping down of the manikin
between students thus saving training time and promoting “real life” skills.
The large shield size of the Bio-Barrier® CPR Manikin Training Faceshield
provides excellent coverage of the face of any manikin. The pliable yet extremely
strong shield provides excellent sealing characteristics against the manikin’s
face.
Packaged in a unique plastic “tissue dispenser style box” the Bio-Barrier® CPR
Manikin Training Faceshield is a simple, cost effective method of improving student
safety during CPR instruction.
|
|
|
Single use. |
|
Latex Free. |
|
2-way biological filter material. |
|
Printed landmarks for easy positioning on manikin’s
face. |
|
Transparent face shield provides excellent coverage
of the manikin’s face. |
|
Unique packaging in plastic “tissue dispenser style
box”. |
|
Very cost effective. |
 |
Part Number and Product
Description |
|
|
|
| |
01RB5050
|
Bio-Barrier® CPR Manikin Training Faceshield in dispenser
pouch. (Dispenser pouch of 50 Faceshields – 4 pouches per Case) |
Note: This device is for training use only on CPR Manikins
by persons trained in CPR and in the use of this device. This device does not
guarantee 100% protection against disease transmission. |
|
|
